Minor - Electrical Engineering

General CSM Minor/ASI requirements can be found here.

ASI in Electrical Engineering

The following twelve credit sequence is required for an ASI in Electrical Engineering: (See Minor/ASI section of the Bulletin for all rules for ASIs at CSM.)

EENG-281 INTRODUCTION TO ELECTRICAL CIRCUITS, ELECTRONICS AND POWER 3.0
EENG-307 INTRODUCTION TO FEEDBACK CONTROL SYSTEMS 3.0
EENG-386 FUNDAMENTALS OF ENGINEERING ELECTROMAGNETICS 3.0

EENG-417

or EENG-421

MODERN CONTROL DESIGN

SEMICONDUCTOR DEVICE PHYSICS AND DESIGN

3.0

 

Minor in Electrical Engineering

A minimum of eighteen credits are required for a Minor in Electrical Engineering as follows. (See Minor/ASI section of the Bulletin for all rules for minors at CSM.)

Students must complete an eighteen credit hour sequence as described below for a minor in EE. All students seeking a minor in EE will need to take one of two possible versions of Electrical Circuits  and EENG 307 (3 credits) after which they can pick an emphasis area to complete the remaining minor requirements. The four emphasis areas are as follows

1. Information Systems and Science (ISS), 18 or 18.5 credits

EENG-282

  or EENG-281

    & EGGN-250

ELECTRICAL CIRCUITS

INTRODUCTION TO ELECTRICAL CIRCUITS, ELECTRONICS AND POWER

         and MULTIDISCIPLINARY ENGINEERING LABORATORY

4.0

 

 

EENG-307 INTRODUCTION TO FEEDBACK CONTROL SYSTEMS 3.0
EENG-284 DIGITAL LOGIC 4.0
EENG-310 INFORMATION SYSTEMS SCIENCE I 4.0
EENG-311 INFORMATION SYSTEMS SCIENCE II 3.0

2. Energy Systems and Power (ESPE), 18 credits

EENG-282 ELECTRICAL CIRCUITS 4.0
EENG-307 INTRODUCTION TO FEEDBACK CONTROL SYSTEMS 3.0
EENG-385 ELECTRONIC DEVICES AND CIRCUITS 4.0
EENG-386 FUNDAMENTALS OF ENGINEERING ELECTROMAGNETICS 3.0
EENG-389 FUNDAMENTALS OF ELECTRIC MACHINERY 4.0

3. Digital Systems, 18 or 18.5 credits

EENG-282

  or EENG-281

    & EGGN-250

ELECTRICAL CIRCUITS

INTRODUCTION TO ELECTRICAL CIRCUITS, ELECTRONICS AND POWER

         and MULTIDISCIPLINARY ENGINEERING LABORATORY

4.0

 

 

EENG-307 INTRODUCTION TO FEEDBACK CONTROL SYSTEMS 3.0
EENG-284 DIGITAL LOGIC 4.0
EENG-383 MICROCOMPUTER ARCHITECTURE AND INTERFACING 4.0
EENG-421 SEMICONDUCTOR DEVICE PHYSICS AND DESIGN 3.0

4. General Electrical Engineering, 19 or 19.5 credits

EENG-282

  or EENG-281

    & EGGN-250

ELECTRICAL CIRCUITS

INTRODUCTION TO ELECTRICAL CIRCUITS, ELECTRONICS AND POWER

         and MULTIDISCIPLINARY ENGINEERING LABORATORY

4.0

 

 

EENG-307 INTRODUCTION TO FEEDBACK CONTROL SYSTEMS 3.0
EENG-284 DIGITAL LOGIC 4.0
EENG-310 INFORMATION SYSTEMS SCIENCE I 4.0
EENG-385 ELECTRONIC DEVICES AND CIRCUITS 4.0

 

© 2017 Colorado School of Mines | | Equal Opportunity | Privacy Policy | Directories | Text Only | Mines.edu | rss

 
Last Updated: 02/01/2017 20:41:25